` Job Interview | Sobha Hartland Contracting LLC - Job Guide

Total Pageviews

Friday, September 13, 2019

Job Interview | Sobha Hartland Contracting LLC

Sobha Hartland Contracting LLC

Career Page

About Company

Sobha Group is a multinational, multi product group with developments and investments in U.A.E., Sultanate of Oman, Qatar, Bahrain, Brunei and India. Established in 1976 by a first-generation Indian entrepreneur, PNC Menon as an interior decoration firm under the name of Services and Trade Company in Muscat, Oman, the group has grown into one of the most respected names in all the countries in which it has established businesses. Sobha stands and strives for benchmark quality, customer centric approach, robust engineering, in-house research, uncompromising business ethics, timeless values and transparency in all spheres of business conduct, which have all contributed to making it a brand trusted for excellence. Sobha is an organization where quality meets excellence, technology meets aesthetics and passion meets perfection.

Ex-Employee Rating and Review


 According to Glass door it has not been rated by ex-employees.

Contact Information

Address:- Sobha Sapphire building, Al khaleej al tejari 2 street, Business bay ,Dubai UAE
Contact no. :-

Job Vacancies in Dubai


Walk in interview for Waterproof Technician - 14th September 2019- 9 am

1. Pre-check work site to make sure that you have a clear path to the building and the work areas. Make note of any safety concerns prior to beginning work.
2. Make necessary preparations for installation process at job site by unloading equipment and materials and placing in location of installation. Also, take into consideration wind drift and overspray risks.
3. Must ensure that the foundation surfaces are free of dirt and debris.
4. Responsible for ensuring that the proper amount of waterproofing material is installed evenly and consistently to specified surfaces with extra attention to ties and where the wall meets the footings. Also accountable for material usages so as not to exceed estimates.
5. Must be able to accurately measure and determine the square foot amount of material used and indicate the figure used on the work order for inventory and billing purposes.
6. Post check the job site to insure proper installation was achieved and for any damages that may have occurred during installation.

Walk in interview for Civil Foreman - 2nd August 2019- 8 am

The ideal candidate should have a minimum of 5 years as a Civil foreman and ready to join immediately.

The required applicant must be well versed with maintenance work.

Wanted candidate should have a good understanding of the construction industry in the UAE.

The needed applicant should be able to understand blueprints and plans.

Interested candidates must be highly organized with leadership abilities.

Send your updates CV with relevant documents.

Walk in interview for Tile Mason - 2nd August 2019- 8 am

1) Align and straighten tile using levels, squares and straightedges.

2) Determine and implement the best layout to achieve a desired pattern.

3) Cut and shape tile to fit around obstacles and into odd spaces and corners, using hand and power cutting tools.

4) Finish and dress the joints and wipe excess grout from between tiles, using damp sponge.

5) Apply mortar to tile back, position the tile and press or tap with trowel handle to affix tile to base.

6) Mix, apply, and spread plaster, concrete, mortar, cement, mastic, glue or other adhesives to form a bed for the tiles, using brush, trowel and screed.

7) Prepare cost and labor estimates based on calculations of time and materials needed for project.

8) Measure and mark surfaces to be tiled, following blueprints.

9) Level concrete and allow to dry.

10) Build underbeds and install anchor bolts, wires and brackets.

11) Prepare surfaces for tiling by attaching lath or waterproof paper, or by applying a cement mortar coat onto a metal screen.

12) Study blueprints and examine surface to be covered to determine amount of material needed.

13) Cut, surface, polish and install marble and granite and/or install pre-cast terrazzo, granite or marble units.

14) Install and anchor fixtures in designated positions, using hand tools.

15) Cut tile backing to required size, using shears.

16) Remove any old tile, grout and adhesive using chisels and scrapers and clean the surface carefully.

17) Lay and set mosaic tiles to create decorative wall, mural and floor designs.

18) Assist customers in selection of tile and grout.

19) Remove and replace cracked or damaged tile.

20) Measure and cut metal lath to size for walls and ceilings, using tin snips.

21) Select and order tile and other items to be installed, such as bathroom accessories, walls, panels, and cabinets, according to specifications.

22) Mix and apply mortar or cement to edges and ends of drain tiles to seal halves and joints.

23) Spread mastic or other adhesive base on roof deck to form base for promenade tile, using serrated spreader.

24) Apply a sealer to make grout stain- and water-resistant.

25) Brush glue onto manila paper on which design has been drawn and position tiles finished side down onto paper.

Walk in interview for Stone Mason - 2nd August 2019- 8 am

Lay out wall patterns or foundations, using straight edge, rule, or staked lines.
• Mark reference points on construction materials.
• Cut tile, stone, or other masonry materials.
• Align masonry materials.
• Mix substances or compounds needed for work activities.
• Shape, trim, face and cut marble or stone preparatory to setting, using power saws, cutting equipment, and hand tools.
• Spread concrete or other aggregate mixtures.
• Apply mortar.
• Apply mortar.
• Apply decorative masonry finishes.
• Remove excess materials from finished construction projects.
• Align masonry materials.
• Install masonry materials.
• Install masonry materials.
• Cut tile, stone, or other masonry materials.
• Smooth surfaces with abrasive materials or tools.
• Drill holes in construction materials.
• Cut tile, stone, or other masonry materials.
• Smooth surfaces with abrasive materials or tools.
• Construct and install prefabricated masonry units.
• Install masonry materials.
• Operate cranes, hoists, or other moving or lifting equipment.
• Dig holes or trenches.
• Position construction forms or molds.
• Apply decorative masonry finishes.
• Load materials into construction equipment.
• Set vertical and horizontal alignment of structures, using plumb bob, gauge line, and level.
• Mix mortar or grout and pour or spread mortar or grout on marble slabs, stone, or foundation.
• Remove wedges, fill joints between stones, finish joints between stones, using a trowel, and smooth the mortar to an attractive finish, using a tuck pointer.
• Clean excess mortar or grout from surface of marble, stone, or monument, using sponge, brush, water, or acid.
• Set stone or marble in place, according to layout or pattern.
• Lay brick to build shells of chimneys and smokestacks or to line or reline industrial furnaces, kilns, boilers and similar installations.
• Replace broken or missing masonry units in walls or floors.
• Smooth, polish, and bevel surfaces, using hand tools and power tools.
• Drill holes in marble or ornamental stone and anchor brackets in holes.
• Repair cracked or chipped areas of stone or marble, using blowtorch and mastic, and remove rough or defective spots from concrete, using power grinder or chisel and hammer.
• Remove sections of monument from truck bed, and guide stone onto foundation, using skids, hoist, or truck crane.
• Dig trench for foundation of monument, using pick and shovel.
• Position mold along guidelines of wall, press mold in place, and remove mold and paper from wall.
• Line interiors of molds with treated paper and fill molds with composition-stone mixture.

How to Apply?

For above walk-in interview, you can directly go for an interview at above mentioned venue and time. For future jobs you can upload your CV/Resume Click here

Sobha Hartland Contracting LLC career for Waterproof Technician, Civil foreman, Tile Mason and Stone Mason job in Dubai